Sound Devices 
ProductsDiscontinued
Products
The following models have been discontinued. Recommended replacements are listed, if available. Contact Sound Devices if a discontinued model requires servicing.
| Model | Description | Recommended Replacement |
|---|---|---|
| 442 / 442N | The four-channel 442 Field Production Mixer set the standard for field mixers for functionality, size, and performance with its introduction in 2001. Its design was driven by the requirements of professionals in film, TV news, documentary, radio, effects recording, and music production. | 552 |
| CS-1 | Basic field case designed for Sound Devices MixPre, MP-2, HX-3, and USBPre by Porta-Brace. Has one internal accessory compartment and an external accessory pocket. Includes premium strap. | CS-3 |
| CS-2 | Field case designed for Sound Devices MixPre, MP-2, and HX-3. Made by Porta-Brace. Includes an internal compartment for an NP-type battery. Has one internal accessory compartment and an external accessory pocket. Includes premium strap. | CS-3 |
| CS-7 | Carry case designed exclusively for Sound Devices 7-Series Field Recorders. Accepts RM-series accessories on the top-side and can be mounted to the CS-302 and CS-442 (shown above). | CS-3 |
| CS-302 | Carry case designed exclusively for Sound Devices 302 Field Mixer. Includes a dedicated pouch for an NP-type battery and leather shoulder strap. Accepts RM-series accessories and AH-2 harness (not included). | CS-3 |
| CS-4W | Carry case designed for the 442 mixer; with included accessory case for wireless. | CS-4 |
| CS-442 | Carry case designed for 442 Field Mixer. Includes a dedicated pouch for an NP-type battery and leather shoulder strap. Accepts RM-series accessories and AH-2 harness (not included). | CS-4 |
| MP-2 | Two-channel microphone preamplifier with 48-volt phantom power, high-performance metering, headphone monitoring, and M/S stereo matrix. Powered from two AA or external DC. | 302 |
| XL-15 | XLR-M to XLR-F cable with built-in 15 dB pad. For use with balanced connections only. | none |
| XL-40 | 50-cm (20-inch) XLR-F to XLR-M cable with integrated 40 dB attenuation switch. Uses Neutrik FXS Type switch at the XLR-M connector. Used to input line level sources into MP-1, MP-2, and MixPre. Also useful to output microphone level signals from an MP-2 or MixPre. | none |
| XL-55 | XLR-F to XLR-M cable with built-in 55 dB attenuation and unbalanced output for early MixPre and MP-2 to Sony PD-XXX camera connection. | none |
| XL-LB | LEMO®-5 to BNC cable for time code jamming of audio and video equipment with BNC connectors for SMTPE time code; 31-inch. | XL-LB2 |
| XL-B1 | Spare battery pack for 7-Series portable recorders. Compatible with Sony L-Series camcorder mount. 7.2 V, 1500 mAh | XL-B2 |
| XL-K2 | Blue knob accessory kit for 442 mixer. | none |
| XL-NP | NP-type battery cup with 12-inch cable terminated in Switchcraft locking DC jack at equipment end. For use with HX-3, MM-1, MP-2, MixPre (sn <0506), and 442 (sn <0303). | XL-NPH |
| XL-TP | In-line barrel adapter converts phantom power (12-volts to 15-volts) to 12-volt T-power. Designed to work with Sound Devices MP-1, MP-2, and MixPre. | none |
| XL-WP | Universal AC-to-DC power supply for Sound Devices MM-1 and HX-3. 100–240, 50/60 Hz; output 12 VDC, 24 watts on coaxial power connector. | XL-WP2 |
| XL-WPH | Universal AC-to-DC power supply for Sound Devices mixers and audio recorders. Input: 100–240, 50/60 Hz; output 12 VDC, 24 watts on Hirose 4-pin connector. | XL-WPH2 |